Cisco Catalyst Micro Switch for Walljack
Cisco's purpose-built product family for FTTx deployments



Cisco Products
Cisco Catalyst Micro Switches
Cisco Catalyst Micro Switch for Wall-Jack Deployments, 2x SFP uplinks
#CMICR-4PS
המחיר שלנו: הצעת מחיר
Cisco Catalyst Micro Switch for Wall-Jack Deployments, 1x copper + 1x SFP uplink
#CMICR-4PC
המחיר שלנו: הצעת מחיר

מחירים נוספים מופיעים למטה, או לחצו כאן!

שימו לב: כל המחירים באתר כוללים מע"מ. החיוב יבוצע על פי שער "העברות והמחאות מכירה" של המטבע (דולר אמריקאי) ביום אישור ההזמנה.

Cisco Catalyst Micro Series Switches:

The Cisco Catalyst Micro Switches are Cisco’s purpose-built product family for FTTx deployments, allowing customers to eliminate IDF, save precious real estate, conserve energy, and cut cabling costs.

Fiber to the desk, office, etc. (FTTx) is not a new concept. In this deployment scenario, the improved range of fiber optics over copper cables allows access switches to be deployed right next to the end devices, with uplinks connected directly to the main distribution frame, eliminating the need for an intermediate distribution frame on each floor. However, as access switches get closer to the end users, the requirements for operating noise and product footprint get stricter. Enter the Cisco Catalyst Micro Switches, a product family of small, fanless switches purpose-built for FTTx deployments. These switches offer flexible mounting options and open up a variety of network design and connectivity opportunities.

  • Four Gigabit Ethernet ports and two Gigabit Ethernet copper or fiber uplinks, with line-rate forwarding performance
  • Power over Ethernet Plus (PoE+) support, with up to 60W PoE power budget in wall-jack switches, and up to 120W for desktop versions
  • Fanless design for silent operation and enhanced reliability
  • Enhanced Limited Lifetime Warranty (E-LLW)


Enhanced security

Protect information and infrastructure with advanced security features and Cisco Software-Defined Access integration.


Simple deployment

Easily install and provision the switches with snap-in mounting hardware and Cisco Plug and Play.


Reliable Power over Ethernet

PoE+ with Perpetual PoE features provides reliable power over data cabling for Internet of Things (IoT) devices.


Advanced management

Support for Cisco DNA Center means you can manage the entire network through a single pane of glass.



Deploy secure intelligent switching with Cisco DNA software

Simple, flexible software subscription suites help you achieve the latest Cisco DNA innovations in policy-based automation, secure connectivity, and critical analytics and assurance across your network.


Features and Benefits:


Feature Benefits
Switch reliability and scale
Small form factor, fanless design, silent operation Delivers up to 30W of power per port, ideal for deployment in indoor open workspaces and other areas that require quiet operations.
Perpetual and Fast PoE Perpetual PoE ensures uninterrupted powering of endpoints during switch upgrades, reboots, and configuration changes. Fast PoE ensures powering of PoE endpoints within 5 seconds of power restoration, in case of power losses.
System life These switches come with the industry’s highest level of reliability and 10 years of system life.
Prevalidated architecture Cisco supports tested, validated, and integrated solutions, which can reduce deployment risk and speed up the time to value. Proven robust technology, with existing network and end-to-end security, provide a complete digital building solution.
Installation simplicity
Flexible mounting options Supports flexible deployment and mounting options, including wall mount, C-rail duct mount, desktop, and bottom mount, based on the SKU.
Flexible powering options
  • The switch can be powered through an AC/DC adapter with IEC plugs for 100-240VAC inputs.
  • The desktop version has an uplink Powered Device (PD) port that, when connected with an external power supply, will power up the unit.
Single Pane of Management - Management/Automation Options
Configuration at scale The switches are Cisco DNA ready and can be used as part of the Cisco Digital network Architecture (Cisco DNAC) solution for automated switch deployments.
Automation via Cisco PnP They also support Cisco Network Plug and Play (PnP), a secure, scalable solution that accelerates network device deployments by automating the installation and configuration of Cisco IOS® Software, enhancing productivity and user experience and reducing costs and downtime.
Network management Cisco Prime Infrastructure provides comprehensive network lifecycle management with an extensive library of features that automate initial and day-to-day management. Cisco Prime integrates hardware and software platform expertise and operational experience into a powerful set of workflow-driven configuration, monitoring, troubleshooting, reporting, and administrative tools.
Cisco SDA Extended Node
  • SDA Extended Node provides Cisco DNA Center Automation and Assurance for Cisco Micro switches. It also extends Fabric Benefits to end points connected to the switches, allowing consistent segmentation and policy-based access.
  • SDA Extended Node requires Cisco DNA-A license on the Micro switches, and a Fabric-Edge Capable switch at the upstream.
Software and security
Layer 2 features for operational simplicity
  • IPv6 host support.
  • Simple Network Management Protocol (SNMP) v3 for secure configuration, control, and information retrieval through appropriate MIBs.
  • Link Aggregation Control Protocol (LACP) for creating Ethernet channeling with devices that conform to IEEE 802.3ad.
  • Dynamic Host Configuration Protocol (DHCP) auto-configuration of multiple switches through a boot server.
  • Cisco VLAN Trunking Protocol (VTP), which supports dynamic VLANs and dynamic trunk configuration across all switches.
  • Embedded Remote Monitoring (RMON) software agent for enhanced traffic management, monitoring, and analysis; four RMON groups (history, statistics, alarms, and events) are supported.
  • Link Layer Discovery Protocol (LLDP) and LLDP Media Endpoint Discovery (LLDP-MED) enhancements for easy identification of end devices.
Constrained Application Protocol (CoAP) support The switches functions as a CoAP Proxy. CoAP is a lightweight protocol enabling sensors, HVAC, and security systems to interoperate for delivering advanced space analytics.
Security and threat defense
  • 802.1X, MACAuth, TACACS+, and RADIUS authentication capabilities for secure onboarding of end devices.
  • Secure Boot to make sure that only signed and authorised images can load on the switch.
  • Port-based access control lists (ACLs) to let the switch automatically allow or block packets based on policies for source and destination IP addresses. Rules can be set up differently on a port-by-port basis.
  • Private VLAN (PVLAN) edge protected port feature for restricting communication between end devices.
  • Network-as-a-sensor: Along with the Cisco Catalyst 9000 Series as an upstream switch, this switch has Network-as-a-Sensor (NaaS) capabilities to provide broad and deep visibility into network traffic flow patterns and rich threat intelligence information that allows rapid identification of security threats.
  • Network-as-an-enforcer: Along with the Cisco Catalyst 3850 Series as an upstream switch, device profiling and Network-as-an-Enforcer (NaaE) capabilities are enabled to dynamically enforce role-based security to reduce the overall attack surface, contain attacks, and minimize the time needed to isolate threats when detected using Cisco TrustSec® with Cisco Identity Services Engine (ISE).
Power management
Switch hibernate and deep sleep mode Switch sleep management can be initiated through Cisco EnergyWise®, as was traditionally done, or through CoAP. CoAP support in the Catalyst Micro Switches enables a sleep trigger. This support is provided for initiating sleep with the Real-Time Clock (RTC) configuration. The system can wake up based on a wake-on-clock and mode button.
IEEE 802.3az or Energy Efficient Ethernet (EEE) Ports dynamically sense idle periods between traffic bursts and quickly switch the interfaces into a low-power idle mode, reducing power consumption.
System power efficiency The switches also improve the industry standard on system power efficiency. During the sleep condition, the system is reducing its power use by 65%, improving its energy efficiency.
Cisco Energy Manager Integrated with the Cisco Energy Management suite for full energy control and visibility.
Power supply Certified AC/DC adapter.

Specifications:


Specifications
Performance
Forwarding bandwidth 6 Gbps
Switching bandwidth (full-duplex capacity) 12 Gbps
Flash memory 256 MB
Memory DRAM 512 MB
Max VLANs 64
VLAN IDs 1-4094
Maximum Transmission Unit (MTU) Up to 1500 bytes
MAC entries 15000
Port channels 4
Queues 4 egress queues per port
Buffers 1000
ACLs 180 MAC, IPv4 and IPv6
Bootup time 30 seconds
Forwarding rate, 64-byte packet Cisco Catalyst Micro Switches CMICR-4PS: 8.928 mpps
CMICR-4PC: 8.928 mpps
CMICR-4PT: 8.928 mpps
Connectors and cabling Interfaces:
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cabling
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
1000BASE-FX port: SFP connector, optical cable
Power connector A specific power connector for the switch itself to be used with the recommended AC/DC adapter.
Indicators Per-Port status: Link integrity, disabled, activity, speed, PoE status
SystEM status: System, power-saving mode
Dimensions
Dimensions (H x W x D) CMICR-4PS: 1.79 x 3.54 x 3.10 in (4.55 x 9.0 x 7.88 cm)
CMICR-4PC: 1.79 x 3.54 x 3.10 in (4.55 x 9.0 x 7.88 cm)
CMICR-4PT: 1.77 x 6.00 x 5.29 in (4.5 x 15.24 x 13.45 cm)
Weight CMICR-4PS: 1.32277 lbs (0.60 kg)
CMICR-4PC: 1.32277 lbs (0.60 kg)
CMICR-4PT: 2.0724 lbs (0.940 kg)
Environmental Ranges
Operating temperature up to 5000 ft (1524 m) -5°C to +35°C (23F to +95F)
Operating temperature up to 10,000 ft (3048 m) -5°C to +30°C (23F to +86F)
Storage temperature up to 15,000 ft (4572 m) -25°C to +70°C (-13F to +158F)
Operating altitude Up to 3048 m
Up to 10,000 ft
Storage altitude Up to 4000 m
Up to 15,000 ft
Operating relative humidity 5% to 95% noncondensing
Storage relative humidity 5% to 95% noncondensing
Power adapter specifications
Voltage range Minimum: 85VAC
Nominal: 100/12 /240 VAC
Maximum: 264VAC
Line frequency Minimum: 47 Hz
Nominal: 50/60 Hz
Maximum: 63 Hz
Adapter output rating
Output 53V
Voltage (VDC) at 0.7A load 53.5V
Set tolerance (% and VDC) ±1% (52.965 ~ 54.035)
Min. current (A) 0
Max. current (A) 1.5
Total error and ±2%
Software Feature Supports
Management and standards support
SNMP MIBs supported
  • BRIDGE-MIB
  • CISCO-BRIDGE-EXT-MIB
  • CISCO-CDP-MIB
  • CISCO-CONFIG-COPY-MIB
  • CISCO-ENVMON-MIB
  • CISCO-ERR-DISABLE-MIB
  • CISCO-FLASH-MIB
  • CISCO-IF-EXTENSION-MIB
  • CISCO-IGMP-FILTER-MIB
  • CISCO-LAG-MIB
  • CISCO-MEMORY-POOL-MIB
  • CISCO-PAGP-MIB
  • CISCO-PING-MIB
  • CISCO-PORT-STORM-CONTROL-MIB
  • CISCO-PROCESS-MIB
  • CiscopowerEthernetMIB
  • CISCO-ENTITY-SENSOR-MIB
  • ciscoPowerEthernetExtMIB
  • ciscoPoePdMIB
  • CISCO-STP-EXTENSIONS-MIB
  • CISCO-SYSLOG-MIB
  • CISCO-TCP-MIB
  • CISCO-UDLDP-MIB
  • CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
  • CISCO-VLAN-MEMBERSHIP-MIB
  • CISCO-VTP-MIB
  • ENTITY-MIB
  • ETHERLIKE-MIB
  • IEEE8021-PAE-MIB
  • IEEE8023-LAG-MIB
  • IF-MIB
  • SNMPv2-MIB
  • TCP-MIB
  • UDP-MIB
Standards
  • IEEE 802.1D Spanning Tree Protocol
  • IEEE 802.1p CoS Prioritization
  • IEEE 802.1Q VLAN
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab (LLDP)
  • IEEE 802.3ad
  • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
  • IEEE 802.3af, 802.3at, and 802.3bt
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • RMON I and II standards
  • SNMP v1, v2c, and v3
  • IEEE 802.3az
  • IEEE 802.1ax
RFC compliance
  • RFC 768 - UDP
  • RFC 783 - TFTP
  • RFC 791 - IP
  • RFC 792 - ICMP
  • RFC 793 - TCP
  • RFC 826 - ARP
  • RFC 854 - Telnet
  • RFC 951 - Bootstrap Protocol (BOOTP)
  • RFC 959 - FTP
  • RFC 1112 - IP Multicast and IGMP
  • RFC 1157 - SNMP v1
  • RFC 1166 - IP Addresses
  • RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery
  • RFC 1305 - NTP
  • RFC 1492 - TACACS+
  • RFC 1493 - Bridge MIB
  • RFC 1542 - BOOTP extensions
  • RFC 1901 - SNMP v2C
  • RFC 1902-1907 - SNMP v2
  • RFC 7252 - CoAP
  • RFC 1981 - MTU Path Discovery IPv6
  • FRC 2068 - HTTP
  • RFC 2131 - DHCP
  • RFC 2138 - RADIUS
  • RFC 2233 - IF MIB v3
  • RFC 2373 - IPv6 Aggregatable Addrs
  • RFC 2460 - IPv6
  • RFC 2461 - IPv6 Neighbor Discovery
  • RFC 2462 - IPv6 Autoconfiguration
  • RFC 2463 - ICMP IPv6
  • RFC 2474 - Differentiated Services (DiffServ) Precedence
  • RFC 2597 - Assured Forwarding
  • RFC 2598 - Expedited Forwarding
  • RFC 2571 - SNMP Management
  • RFC 3046 - DHCP Relay Agent Information Option
  • RFC 3376 - IGMP v3
  • RFC 3580 - 802.1X RADIUS
Safety and compliance support
Safety standards
  • UL 60950-1
  • CAN/CSA 22.2 No. 60950-1
  • EN 60950-1
  • IEC 60950-1
  • CE Marking
  • AS/NZS 60950.1
  • IEC/UL 62368-1(supersede IEC/UL 60950-1 in 2019)
Electromagnetic emissions certifications
  • FCC Part 15, CFR 47, Class A, North America
  • EN 55022 (CISPR22) and EN 55024 (CISPR24), CE marking, European Union
  • AS/NZS, Class A, CISPR22:2004 or EN55022, Australia and New Zealand
  • ICES-003 Issue 6: 2016
  • KN 32: 2015
  • TCVN 7189: 2009
  • V-3/2015.04
  • KN35: 2015
  • TCVN 7317: 2003
Environmental Reduction of Hazardous Substances (ROHS) 6
NEBS NEBS not required

Documentation:

Download the Cisco Catalyst Micro Switches Datasheet (PDF).

It appears you don't have a PDF plugin for this browser. No biggie... you can click here to download the PDF file.

הערות תמחור:

Cisco Products
Cisco Catalyst Micro Switches
Cisco Catalyst Micro Switch for Wall-Jack Deployments, 2x SFP uplinks
#CMICR-4PS
המחיר שלנו: הצעת מחיר
Cisco Catalyst Micro Switch for Wall-Jack Deployments, 1x copper + 1x SFP uplink
#CMICR-4PC
המחיר שלנו: הצעת מחיר